01 Wood Tex Priming Oil

01 Wood Tex Priming Oil

Flügger Wood Tex is aqueous products for exterior wood. They give the wood a highly weather-resistant surface with maximum durability, gloss and colour stability. The products are easy to apply and quick-drying.

Product Description

Colourless priming oil that penetrates, ensures good adhesion and resists moisture absorption. Finish treatment with pigmented wood stain or paint. Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.
  • Penetrates and ensures adhesion
  • Resists moisture absorption
  • Inhibits mould and mildew growth on the surface of the final treatment


Priming untreated or bare cleaned wood.


Must be absorbent, clean, dry, solid and suitable for paint treatment.
Water traps or risk of water accumulation may not occur.
The moisture level in the wood prior to paint treatment max.:
Windows and doors: 12% ± 3; Overhangs, fences and cladding: 18%.


Loose wood stain, paint and decayed wood fibres must be removed by cleaning and sanding
Dirt, grease, chalking material and mould and mildew must be removed by cleaning


Brush or roller.
If applying using a roller, brush over afterwards.
Wipe off excess priming oil.
Cold or heat can affect the material’s viscosity
Condensation must not form.
Avoid working in rain or direct sunlight.
Cold weather and high humidity increase the drying time, complete curing and re-treatment interval.
High temperature and low humidity reduce the drying time and complete curing.
Always apply test treatments to check and accept the adhesion and results.

Colourless and non-absorbent.
Final treatment immediately once dry.
Unprotected exposure to moisture, water and sunlight will degrade the priming oil.

Be Aware

Protect freshly painted surface from adverse weather conditions.
Take appropriate measures against the effects of moisture and rainfall on freshly painted surfaces.
The surface achieves maximum robustness when fully cured.

Technical Data

Priming oil
Density (kg/liter)
Weight %
Volume %
Nominal spreading rate (m2/l)
Min. +5°C
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
Recoatable at 20c, 60% RF (Hours)
Fully cured at 20c, 60% RF (Days)
Do not dilute
Cleaning of Tools etc.
Water and soap

Storage: Cool, frost-free and tightly closed

Protection equipment for: Painting: eye protection, gloves. Sanding: respiratory protection.

Environment information: Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.


August 2020