03 Wood Tex
Product DescriptionSemi-matt transparent surface that leaves the wood’s vein structure visible. Inhibits mould and mildew growth on the surface. Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.
- Easy to apply
- Easy to maintain
- Contains UV filter
UsageBuilding structures such as eaves, gable cladding and facades. Light types of wood, such as pine or spruce, including pressure or vacuum-treated wood. The substrate must be primed or previously treated with transparent wood stain.
SubstrateMust be clean, dry, solid and suitable for paint treatment.
Insufficiently protected cross-cut wood, water traps or the risk of water accumulation must not occur.
The moisture level in the wood prior to paint treatment max.:
Windows and doors: 12% ± 3; Overhangs, fences and cladding: 18%.
TreatmentLoose wood stain, paint and decayed wood fibres must be removed by cleaning and sanding.
Remove dirt, filth, grease and chalking material with Facade Clean.
Algae, mould and mildew must be removed by cleaning with Facade Anti-green.
Round off sharp edges for best possible hiding power
All bare woodwork must be treated before or immediately after mounting
Glossy, previously painted surfaces must be sanded matt.
New or bare cleaned wood must be primed with Flügger 01 Wood Tex Priming Oil
Substrate which has stood untreated for longer than 4 weeks must be cleaned and loose wood fibres removed
Best durability is achieved with two coatings.
The perceived hue depends on the substrate, absorbency and number of treatments.
ApplicationBrush, roller or spray.
If applying using a roller or spray, brush over afterwards.
Choose appropriate tools for the desired finish.
Apply wet-on-wet, and finish by brushing in the same direction.
Always use the same batch no. for continuous/unbroken surfaces.
Cold or heat can affect the material’s viscosity
Material temperature when spraying must be min. 15°C.
Condensation must not form.
Avoid working in rain or direct sunlight.
Cold weather and high atmospheric humidity increase the drying time, complete curing and re-treatment interval.
High temperature and low atmospheric humidity reduce the drying time and complete curing.
Always apply test treatments to check and accept the adhesion and results.
The durability of the surface depends on the wood quality, structure, application and exposure. The expected durability can therefore be shorter or longer than stated.
Chalking from strong shades due to surplus pigment may occur.
Does not block strike-through from knots or water-soluble colourants.
Be AwareProtect freshly painted surface from adverse weather conditions.
Take appropriate measures against the effects of moisture and rainfall on freshly painted surfaces.
The surface achieves maximum robustness when fully cured.
Storage: Cool, frost-free and tightly closed
Protection equipment for: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection.
Environment information: Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.