2-in-1 Wood Tex Classic

2-in-1 Wood Tex Classic

Flügger Wood Tex Classic is a series of oil-based products for exterior wood with good penetration and maximum protection against moisture and water. The products can be used at low temperatures.

Product Description

Matt transparent two-in-one wood stain and primer that leaves the wood’s vein structure visible. Inhibits mould growth and mildew growth on the surface.
  • Fast and simple application
  • Transparent
  • Contains UV filter

Usage

Building structures such as eaves, gable cladding and facades. For light and dark types of wood, including pressure or vacuum-impregnated wood.

Substrate

Must be clean, dry, solid and suitable for paint treatment.
Insufficiently protected cross-cut wood, water traps or the risk of water accumulation must not occur.
The moisture level in the wood prior to paint treatment max.:
Windows and doors: 12% ± 3; Overhangs, fences and cladding: 18%.

Treatment

Loose wood stain, paint and decayed wood fibres must be removed by stripping and sanding.
Remove dirt, filth, grease and chalking material with Facade Clean.
Algae, mould and mildew must be removed by cleaning with Facade Anti-green.
Round off sharp edges for best possible hiding power
All bare woodwork must be treated before or immediately after mounting
Glossy, previously painted surfaces must be sanded matt.
Substrate which has stood untreated for longer than 4 weeks must be cleaned and loose wood fibres removed.
Best durability achieved with two or more coatings.

Application

Brush or roller.
If applying using a roller, brush over afterwards.
Choose appropriate tools for the desired finish.
Apply wet-on-wet, and finish by brushing in the same direction.
Always use the same batch no. for continuous/unbroken surfaces.
Cold or heat can affect the material’s viscosity
Condensation must not form.
Avoid working in rain or direct sunlight.
Cold weather and high atmospheric humidity increase the drying time, complete curing and re-treatment interval.
High temperature and low atmospheric humidity reduce the drying time and complete curing.
Always apply test treatments to check and accept the adhesion and results.

Matt and transparent. Expected durability: 4 years.
The durability of the surface depends on the wood quality, structure, layer thickness, how it is applied and exposure. The expected durability can therefore be shorter or longer than stated.

Be Aware

Protect freshly painted surface from adverse weather conditions.
Take appropriate measures against the effects of moisture and rainfall on freshly painted surfaces.
The surface achieves maximum robustness when fully cured.

Technical Data

Producttype
Wood stain
Gloss
Matte
Density (kg/liter)
0.85
Weight %
29
Volume %
25
Nominal spreading rate (m2/l)
6
10
4
Min. +5°C
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
6
Recoatable at 20c, 60% RF (Hours)
12
Fully cured at 20c, 60% RF (Days)
28
Dilution
Do not dilute
10
Cleaning of Tools etc.
White spirit

Storage: Tightly closed

Clean off the paint from tools and wash them with brush cleaner. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.:

Version

August 2020