Floor Paint Acrylic

Floor Paint Acrylic

Flügger Floor is products for treatment of concrete and wooden floors. The products combine easy application, wearability, washability and finish.

Product Description

Fast-drying diffusion-open acrylic floor paint. Recommended for premises without special functional requirements, use-related wear and soiling.
  • Abrasion resistant surface
  • Diffusion-open
  • Does not turn yellow

Usage

Floors in living rooms, entryways, offices, boiler rooms, storage rooms and cellars.

Substrate

Must be clean, dry, solid and suitable for surface treatment.

Treatment

Remove cement slurry by machine grinding.
Remove loose material and paint by cleaning and sanding.
Remove dirt, grime, grease, oil, wax and chalking materials by cleaning with Fluren 37.
Remove soap residue using Fluren 33.
Sand flat hard, slippery surfaces.
Repair concrete damage with concrete.
Cracks, irregularities and holes must be spackled with epoxy spackle.
Prime concrete using the right primer and prime wood with Stop Primer
Best durability is achieved with 2 treatments.
Some colours require an extra treatment.

Application

Brush or roller
Decide your choice of tool/utensil depending on the finish
Apply wet on wet and finish by brushing/rolling in the same direction
Always use the same batch number on contiguous/unbroken surfaces
Differences in surface structure can result in colour deviation
Cold/heat can affect the viscosity of the material
Condensation during drying/curing must not occur.
Cold and increased humidity extends drying time, full curing and recoat interval
Increased temperature and low atmospheric humidity reduce drying time and full curing
Always perform a test treatment for a check and acceptance of adhesion and result

Environmental information

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost free and tightly closed

Protection equipment: Painting: eye protection, gloves. Sanding: respiratory protection.

Technical Data

Producttype
Acrylic Paint
Gloss
50,Semi Gloss
Density (kg/liter)
1.17
Weight %
41
Volume %
32
Nominal spreading rate (m2/l)
8
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
2
Recoatable at 20c, 60% RF (Hours)
6
Fully cured at 20c, 60% RF (Days)
28
Emission cf. ISO 16000-9:2011
110 < µg/m²h after 28 days
Dilution
Water
Cleaning of Tools etc.
Water
Supplementary Info
Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.

Current TDS Version

styczeń 2021


Replaces TDS Version

wrzesień 2020