Dekso Ultramat 1

Dekso Ultramat 1

Dekso are Premium products that possess special properties that combine function and aesthetics with uncompromising quality.

Product Description

Ultramatt 100 % acrylic wall and ceiling paint. Recommended for premises with high functional and special aesthetic requirements that are exposed to some dirt and wear and tear.
  • Wall and ceiling paint
  • Ultramatt
  • Extra robust surface

Usage

Living rooms, corridors, entrance areas, offices, kitchens, clinics, retail shops, stairways and stairwells.
Concrete, lightweight concrete, plaster, bricks, gypsumboards, fiber plaster, cement fiber boards, cement particle boards.

Substrate

Must be clean, dry, solid and suitable for surface treatment.

Treatment

Remove loose material and paint by cleaninng and sanding.
Remove dirt, grime, grease and chalking materials with Fluren 37.
Water blotches or surfaces stained by nicotine or soot must be cleaned with Fluren 49 and treated with Stop Primer.
Hard, smooth surfaces should be sanded matt and painted with Fix Primer as required.
Cracks, unevenness and holes must be spackled.
Absorbent and porous substrates must be primed with Flügger Sealer
Priming is done with Combi Primer or Special Primer.
Apply 1-2 times. Some colours require an extra treatment.

Application

Brush, roller or spray
Decide your choice of tool/utensil depending on the finish
Apply wet on wet and finish by brushing/rolling in the same direction
Always use the same batch number on contiguous/unbroken surfaces
Differences in surface structure can result in colour deviation
Cold/heat can affect the viscosity of the material
Material temperature for spray painting, min. 12⁰C
Condensation during drying/curing must not occur.
Cold and increased humidity extends drying time, full curing and recoat interval
Increased temperature and low atmospheric humidity reduce drying time and full curing
Always perform a test treatment for a check and acceptance of adhesion and result

Ultramatt strong surface.
Subdued even structure, uniform non-reflecting and robust finish.
Withstands cleaning including spot cleaning with mild detergents without abrasives, soft brush, water and cloth.
Strong especially dark shades are more delicate than light by wear and touch.
Chalking from strong shades due to excess pigment may occur.
Does not block strike-through from knots or water-soluble colourants, water stains and nicotine.
Exercise care in loading the surface until the paint is fully cured.

Technical Data

Producttype
Acrylic Paint
Gloss
1
Density (kg/liter)
1,42
Weight %
59
Volume %
41
Nominal spreading rate (m2/l)
8
Min. +10°C
Humidity
Max. humidity 80 % RH
Dry to touch at 20°C, 60% RF (Hours)
1
Recoatable at 20c, 60% RF (Hours)
4
Fully cured at 20c, 60% RF (Days)
28
Washability
Class 1
Dilution
Water, is usually not diluted
Cleaning of Tools etc.
Water

Storage: Cool, frost free and tightly closed

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.:

Version

September 2020