Dekso H2O 20
Product DescriptionSemi-matt 100 % acrylic wall paint, extra hiding power. Recommended for premises with high functional and special aesthetic requirements that are frequently exposed to dirt and wear and tear.
- Moisture resistant
- High finish
- Extra robust surface
UsageKitchens, washrooms, commercial premises, institutions, clinics, hospitals, light industrial premises and stairways.
In bathrooms for treatments with requirements for water-repellent surface.
Concrete, lightweight concrete, plaster, bricks, gypsumboards, fiber plaster, cement fiber boards, cement particle boards.
SubstrateMust be clean, dry, solid and suitable for surface treatment.
TreatmentRemove loose material and paint by cleaninng and sanding.
Remove dirt, grime, grease and chalking materials with Fluren 37.
Water blotches or surfaces stained by nicotine or soot must be cleaned with Fluren 49 and treated with Stop Primer.
Hard, smooth surfaces should be sanded matt and painted with Fix Primer as required.
Cracks, unevenness and holes must be spackled.
Absorbent and porous substrates must be primed with Flügger Sealer
Priming is done with Combi Primer or Special Primer.
Apply 1-2 times. Some colours require an extra treatment.
ApplicationBrush, roller or spray
Decide your choice of tool/utensil depending on the finish
Apply wet on wet and finish by brushing/rolling in the same direction
Always use the same batch number on contiguous/unbroken surfaces
Differences in surface structure can result in colour deviation
Cold/heat can affect the viscosity of the material
Material temperature for spray painting, min. 12⁰C
Condensation during drying/curing must not occur.
Cold and increased humidity extends drying time, full curing and recoat interval
Increased temperature and low atmospheric humidity reduce drying time and full curing
Always perform a test treatment for a check and acceptance of adhesion and result
Be AwareNot suitable for surfaces where there are requirements for water and vapor tight wet room protection.
Environmental informationClean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.
Storage: Cool, frost free and tightly closed
Protection equipment: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection
Current TDS Version
Replaces TDS Version