Easy Filler

Easy Filler

Product Description

Light, white filler, which is extraordinary easy and practical to apply with its special creamy consistency. Withstands moisture, but is not recommended for areas constantly exposed to water.
  • Does not crack
  • Excellent sanding properties
  • Doesn't sink


For interior and exterior reparation of cracks, fissures and minor holes in masonry, render, concrete, gypsum, and wood.
Prime with priming oil before applying Flügger Easy Filler, when used on wood outdoors.


Must be clean, dry, firm and suitable for surface treatment.


Remove loose material and paint by cleaning, sanding and dusting.
Remove dirt, grime, grease and chalking materials by cleaning with Fluren 37.
Water-soluble discolouration, nicotine and soot can be cleaned with Fluren 49.
Sand flat hard, slippery surfaces.
Apply the filler paste and smooth out.
If necessary, sand the surface using a fine-grained abrasive before finishing treatment.


Apply and smooth out using a filler knife.
Apply a sufficient amount and then work and smooth out the filler paste.
Dip the filler knife into water and smoothen afterwards.
Condensation must not occur.
Always perform a test treatment for a check and acceptance of adhesion and result


Smooth out surface for additional treatment.
Can be painted with both an aqueous acrylic paint and a solvent-based alkyd paint.

Environmental information

Remove as much filler as possible before cleaning with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost-free, and tightly closed

Protection equipment: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection.

Technical Data

Plaster & Sealant
Density (kg/liter)
Weight %
Volume %
Workable temperature
Min. +10°C
Max. humidity 80 % RH.
Fully cured at 20c, 60% RF (Days)
Cleaning of Tools etc.
Supplementary Info
Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.

Current TDS Version

styczeń 2021

Replaces TDS Version

grudzień 2020