Facade Impregnation

Facade Impregnation

Flügger Facade is products for exterior treatment of mineral substrates. Provides a diffusion-open, weather-resistant surface.

Product Description

Water and dirt-repellent impregnation that provides long-lasting protection and reduces absorption of dirt. Minimises the risk of efflorescence and frost burst. Provides a diffusion-open treatment that protects untreated surfaces.
  • Diffusion-open
  • Extremely water-repellent
  • Dirt-repellent


Untreated mineral facades e.g. cement, concrete and brick.
Substrate must be new or untreated. Can also be used on concrete slabs.


Must be absorbent, clean, dry, solid and suitable for surface treatment.
Can be used directly on new substrate.
Surfaces older than 1 year should be cleaned and dry 24 hours before treatment.


Dirt, grease and chalking material must be removed with Facade Clean.
Algae, mould and mildew growth are removed by cleaning with Facade Anti-green.


Brush, roller or spray.
One application is usually enough. If a second coat is necessary, this should be wet-on-wet.
Condensation must not form.
Avoid working in direct sunlight.
Cold weather and high humidity increase the drying time and complete curing.
High temperature and low humidity reduce the drying time and complete curing.
Surfaces must not be exposed to frost for 24 hours after treatment is completed.
Always apply test treatments to check and accept the adhesion and results.

Be Aware

Protect freshly painted surface from adverse weather conditions.
Take appropriate measures against the effects of moisture and rainfall on freshly painted surfaces.
The surface achieves maximum robustness when fully cured.
Cover window glass, metal etc, as spattering may have a mattering effect.
If the surface is to be painted later, this can only be done at least 1 year after application of Facade Impregnation.

Environmental information

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost free and tightly closed

Protection equipment: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection

Technical Data

Density (kg/liter)
Weight %
Volume %
Nominal spreading rate (m2/l)
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
Fully cured at 20c, 60% RF (Days)
Do not dilute
Cleaning of Tools etc.
Supplementary Info
Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.

Current TDS Version

styczeń 2021

Replaces TDS Version

październik 2020