Facade Resist

Facade Resist

Flügger Facade is products for exterior treatment of mineral substrates. Provides a diffusion-open, weather-resistant surface.

Product Description

Full-matt 100% acrylic facade paint, which provides a highly colour retentive, water resistant surface with minimal water absorption and maximum weather resistance. Can be used at low temperatures. Prevents the formation of mould and mould growth on the surface.
  • Fast weatherproof facade paint
  • Withstands rain showers 30 minutes after application
  • Can be applied at a minimum of +2 ° C

Usage

New untreated and previously painted mineral facades of concrete and lightweight concrete.

Substrate

Must be clean, dry, firm and suitable for surface treatment.
The surface must be completely dry containing no efflorescence.
Rising ground moisture or moisture from cracks, protrusions such as water traps, uncovered wall coping or other constructions details must not be permitted.
New, cement-based surfaces must be cured for at least 4 weeks before undergoing treatment.
Leaching of salts and other water-soluble components must not occur.

Treatment

Remove precipitates, loose material and paint by washing and cleaning.
Dirt, grease and chalking material should be removed using Façade Clean.
Algae, mould and mould growth are removed by cleaningwith Façade Algae Remover.
Larger cracks and other damage must be filled with cement-bound material.
Prime new substrates and light chalking or absorbent surfaces using Flügger Facade Primer.
Treat two or more times for optimal durability.

Application

Brush, roller or spray gun.
Decide on your mode of application according to the desired finish.
Apply uniformly wet on wet, finish by brushing in the same direction.
Always use the same batch no. on contiguous/unbroken surfaces.
Cold / heat can affect the viscosity of the material.
Material temperature for spray painting, min. 15°C.
Condensation must be prevented during drying/curing.
Avoid working in direct sunlight and on hot surfaces.
Cold and increased humidity extends drying time, full curing and recoating interval.
Increased temperature and low atmospheric humidity reduce drying time and full curing.
Always test adhesion and result before hanging.

Be Aware

Protect freshly painted surface from adverse weather conditions.
Take appropriate measures against the effects of moisture and rainfall on freshly painted surfaces.
The surface achieves maximum robustness when fully cured.

Environmental information

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost free and tightly closed

Protection equipment: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection

Technical Data

Producttype
100% acrylic paint
Gloss
Full Matte
Density (kg/liter)
1.45
Weight %
60
Volume %
42
Nominal spreading rate (m2/l)
7
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
1
Fully cured at 20c, 60% RF (Days)
28
EN Tæthed
Water vapour: Class 1, Sd < 5 m in accordance with EN 1504-2 Sd = 0.1 m corresponding to class 1 according to EN 7783-2 Liquid water transmission rate: W < 0.1 kg/m²h 0.5
Washability
Class 1
Dilution
Water should not normally be diluted
Cleaning of Tools etc.
Water
Supplementary Info
20: EN 1504-2: 2004. Surface protection product. Coating. Water vapor permeability: Class 1. Permeability to CO2: Sd>50m Capillary absorption and permeability to water: w <0,1 kg/m2h0,5. Adhesion strength: ≥ 0,8 Mpa.

Current TDS Version

czerwiec 2021


Replaces TDS Version

marzec 2021