01 Wood Tex Oil Primer P7

01 Wood Tex Oil Primer P7

Flügger Wood Tex is a series of aqueous products for exterior wood. They give the wood a highly weather-resistant surface with maximum durability, gloss and colour stability. The products are easy to apply and quick-drying.

Product Description

Colourless priming oil that penetrates, ensures good adhesion and resists moisture absorption. Prevents the formation of mould and mould growth on the surface of the final coat.
  • Penetrates and ensures adhesion
  • Resists moisture absorption
  • Inhibits mould and mildew growth on the surface of the final treatment


Priming untreated or bare cleaned wood including pressure or vacuum-treated wood.


Must be absorbent, clean, dry, solid and suitable for paint treatment.
Water traps or risk of water accumulation may not occur.
The moisture level in the wood prior to paint treatment max.:
Windows and doors: 12% ± 3; Overhangs, fences and cladding: 18%.


Loose wood stain, paint and decayed wood fibres must be removed by cleaning and sanding
Dirt, grease, chalking material and mould and mildew must be removed by cleaning


Brush or roller.
If applying using a roller, brush over afterwards.
Wipe off excess priming oil.
Cold or heat can affect the material’s viscosity
Condensation must not form.
Avoid working in direct sunlight.
Cold weather and high humidity increase the drying time, complete curing and re-treatment interval.
High temperature and low humidity reduce the drying time and complete curing.
Always apply test treatments to check and accept the adhesion and results.

Be Aware

Protect freshly painted surface from adverse weather conditions.
Take appropriate measures against the effects of moisture and rainfall on freshly painted surfaces.
The surface achieves maximum robustness when fully cured.

Environmental information

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost free and tightly closed

Protection equipment: Painting: eye protection, gloves. Sanding: respiratory protection.

Technical Data

Priming oil
Density (kg/liter)
Weight %
Volume %
Nominal spreading rate (m2/l)
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
Fully cured at 20c, 60% RF (Days)
Do not dilute
Cleaning of Tools etc.
Supplementary Info
Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.

Current TDS Version

styczeń 2021

Replaces TDS Version

październik 2020