Floor Varnish Gloss

Floor Varnish Gloss

Flügger Floor Varnish is perfect for the treatment of wood flooring. Gives a dirt-resistant, robust and durable surface.

Product Description

Glossy, PU reinforced acrylic floor varnish. Rich with good coalescence, extra durability and scratchproof. Recommended for areas with high aesthetic and functional requirements, in busy areas subject to some wear and tear.
  • Durable Rich Scratch-proof
  • Rich
  • Scratch-proof

Usage

For all types of wood in living rooms, corridors, entries, stairwells, offices and kitchens. The surface must be treated with varnish primer or have been previously varnished.

Substrate

Must be clean, dry, firm and suitable for surface treatment.

Treatment

Remove uneven or peeling varnish and paint completely down to the clean wood by sanding.
Prime untreated wood using Flügger Floor Primer.
Clean existing varnish for dirt, grease and wax using Flügger Natural Wood Cleaner.
Sand to matt finish but not too deep.
Vacuum clean and dry with a hard-wrung cloth.
Best durability is achieved with 2 or more treatments.

Application

Brush or roller.
Decide on your mode of application according to the desired finish.
Apply wet on wet and finish by brushing/rolling in the same direction, avoid overlap and varnish-pools.
Always use the same batch number on contiguous/unbroken surfaces.
Differences in surface structure can result in a deviation in gloss.
Cold/heat can affect the viscosity of the material.
Condensation must be prevented during drying/curing.
Cold and increased humidity extends drying time, full curing and recoat interval.
Increased temperature and low atmospheric humidity reduce drying time and full curing.
Wood floors must have balanced moisture when undergoing treatment.
Check adhesion by pressing a coin perpendicularly against the varnished surface.
Always perform a test treatment for a check and acceptance of adhesion and result

Glossy, colourless, extra durable, robust and scratchproof.
Rich finish with optimal coalescence.
Withstands general wear and tear and cleaning with a universal cleaning agent and a wrung cloth.
Does not prevent any discolouration from the lignin or tannin in the wood.
Exercise care in loading the surface until the varnish is fully cured.
The surface can be used after 24 hours.

Technical Data

Producttype
Laquer
Gloss
Gloss,80
Density (kg/liter)
1,03 kg/liter
Weight %
0
Volume %
0
Nominal spreading rate (m2/l)
10
Min. +15°C
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
1
Recoatable at 20c, 60% RF (Hours)
3
Fully cured at 20c, 60% RF (Days)
28
Dilution
Do not dilute, cannot be tinted
10
Cleaning of Tools etc.
Water

Storage: Cool, frost free and tightly closed

Protective equipment for: Brush/roller application: Safety goggles and gloves. Sanding: Respiratory protection.

Environmental information: Remove as much paint as possible from brushes before washing them in water. Do not pour residue/remains of paint down the drain, take it to your local recycling centre. Minimise your paint waste by calculating how much paint you need in advance. Store leftover paint properly so the remains can be reused, which minimises the environmental impact.

Version

August 2020