Wood Oil - Impredur

Wood Oil - Impredur

Flügger Wood Oil is a series of oil-based products for the treatment of exterior woodwork. They protect the surface of the wood while also ensuring that the structure and vein structure are visible.

Product Description

Aqueous special wood oil with additional water-repellent properties. Contains UV filter which protects against the sun’s harmful rays. Pigmented wood oil provides the best protection. Stunt growth of mould and mildew on the surface of the top coat.
  • Visible vein structure and structure
  • Extra water-repellent surface
  • Contains UV filter

Usage

Wood facades, garden furniture, windows and doors.
Light and dark weather-resistant types of wood and pressure-impregnated wood.

Substrate

Must be absorbent, clean, dry, solid and suitable for surface treatment.
For substrates which has not been previously treated with varnish, paint or opaque wood stain.
Insufficiently protected cross-cut wood, water traps or the risk of water accumulation must not occur.
The moisture level in the wood prior to paint treatment max.:
Windows and doors: 12% ± 3; Overhangs, fences and cladding: 18%.

Treatment

Wood stain, paint and decayed wood fibres must be completely removed by cleaning and sanding.
Remove dirt, filth, grease and chalking material with Terrace Cleaner.
Algae, mould and mildew must be removed by cleaning with Facade Anti-green.
Uneven surfaces must be sanded to an uniform surface.
New or absorbent previously treated substrates must be primed with priming oil.
Always apply test treatments to check and accept the adhesion and result.

Application

Apply with a brush or roller and work thoroughly into the wood.
Choose appropriate tools for the desired finish.
Apply wet-on-wet, and finish by brushing in the same direction.
Repeat the process until the wood is saturated with an uniform appearance without the formation of a varnish layer. Wipe off excess wood oil.
Condensation must not form.
Avoid working in direct sunlight.
Cold weather and high atmospheric humidity increase the drying time, complete curing and re-treatment interval.
High temperature and low atmospheric humidity reduce the drying time and complete curing.

Colourless or transparent. Expected durability 1-2 years.
The durability of the surface depends on wood quality, construction, how it is applied and exposure. The expected durability can therefore be shorter or longer than stated.

Technical Data

Producttype
Wood stain
Density (kg/liter)
1.01
Weight %
22
Volume %
21
Nominal spreading rate (m2/l)
12
15
10
Min. +10°C
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
1
Recoatable at 20c, 60% RF (Hours)
8
Fully cured at 20c, 60% RF (Days)
28
Dilution
Do not dilute
10
Cleaning of Tools etc.
Water and brush cleaner

Storage: Cool, frost-free and tightly closed

Clean off the paint from tools and wash them with water and brush cleaner. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.:

Version

August 2020